The W2395c equalizer offers versatile sound shaping possibilities for the most diverse program material. The unit provides active Baxandall tone controls for treble and bass as well as a semi-parametric mid band filter.
• Two active Baxandall tone control faders for high and low frequencies (+/- 12 dB)
• Semi-parametric mid band filter
• Selectable frequency ranges for the high frequency band (2 kHz | off | 5 kHz)
• Selectable frequency ranges for the low frequency band (80 Hz | off | 110 Hz)
• Variable mid band filter continuously sweepable between 155 Hz and 3.5 kHz (max. +/- 10 dB)
• Q-factor control of the mid band filter via three-position switch (1.5 | 0.7 | 0.4)
Low band EQ, adjustable frequency 80 Hz / filter bypass / 110 Hz via switch Gain, continuously variable +/- 12 dB range via fader
Mid band frequency 155 Hz to 3.5 kHz, continuously variable Gain, continuously variable +/- 10 dB range via rotary control Q-factor, 3-position switch narrow, wide, medium (Q-factor 1.5 / 0.4 / 0.7)
High band EQ, adjustable frequency 2.0 kHz / filter bypass / 5.0 kHz Gain, continuously variable +/- 12 dB range via fader
on-switch enable / disable filter module hard-bypass Input – electronically balanced Reference input level +6 dBu Maximum input level +15 dBu Input impedance 10 kOhm Output – electronically balanced Reference output level +6 dBu Maximum output level +22 dBu / (0.05% THD+N) Output impedance 40 Ohm Gain at linear setting 0 dB bei 1 kHz (+/- 0.2 dB) Signal-to-noise ratio < 76 dB Noise level (UWTD / WTD) < 80 dBq / < 75 dBq Harmonic distortion THD+N / 0 dBu 0.009% Frequency range 20 Hz – 40 kHz (+/- 0.2 dB) Delay time of hard bypass relays max. 3 ms Power supply +/- 16 V über api ® – System + max.110 mA / -16V max. 70 mA